Epoxy Flooring in Los Angeles, CA

Epoxy flooring in Los Angeles has to cover a lot of ground, from a beach-side garage in Venice to a tilt-up warehouse in the industrial flats near downtown. The city runs from sea level at the Pacific to more than 5,000 feet on Mount Lukens, so the slab we test in one neighborhood can behave very differently from the one across the freeway. We start every job with the same steps: look at the concrete, test it for moisture, and explain in writing what it needs.

Sunlight is the first thing we plan around

Downtown averages about 3,254 hours of sunshine a year, and LAX logs even more. That much light is hard on a plain epoxy that faces an open garage door. Aromatic epoxies can amber over time when ultraviolet light reaches them. For floors that see the sun, we use epoxy as the base and finish with a polyaspartic or aliphatic urethane topcoat that holds its color. For an interior shop with no direct light, a straight epoxy system can make sense, and we will tell you which one fits.

Damp mornings, dry afternoons

Average relative humidity at LAX is about 71%, peaking near 77% in July and August, even though summer days are usually rainless. That combination matters on install day. A cool slab under a humid morning marine layer can sit close to the dew point, and coatings laid on a surface that is collecting condensation can blush or lose bond. Before mixing any material we compare the slab temperature with the dew point, and we schedule coats for the part of the day when the gap is safe.

Quakes and cracked slabs

Southern California sees roughly 10,000 earthquakes a year, most too small to feel, and the 1994 Northridge quake still shows up in older slabs as hairline and settlement cracks. We do not hide those under a pretty finish. Moving cracks get a flexible filler or a saw-cut joint line. Static cracks get a rigid repair that is ground flush. You will see which is which on the quote.

Get a Free Estimate

Work floors for a manufacturing town

Los Angeles is still the largest manufacturing center in the United States by employment, and the twin ports of Los Angeles and Long Beach are among the busiest in the world. That means plenty of food plants, small fabricators, auto shops and storage buildings with concrete that takes a beating. For these spaces we look at 100% solids epoxy, chemical resistance, slip texture and line striping, and we can phase the work so a business keeps running.

Renters, owners and parking

Only about 36% of housing units in the city are owner-occupied. Renters should ask the landlord first, and condo owners should check whether the parking level is common property.